Name: Insect Screen For Ford Ranger PX2 2016 - 2018
Brand: Tuff Terrain
SKU: TTSFR16
Price: 156.0 AUD
Availability: OutOfStock

Insect Screen For Ford Ranger PX2 2016 - 2018

$156.00

Aussie Designed

In stock, ready to ship
Backordered, shipping soon

SHOP NOW VIA

• 1 x Tuff Terrain radiator insect screen

• Mounting bolts

• Mounting hooks

• Washers

• Fitting instructions

• Suits Ford Ranger PX2 2016–08/2018

• Blocks insects before radiator fins

• Helps reduce overheating risk

• Shields grille from loose stones

• 1 mm zinc-plated steel mesh

• No drilling needed, fittings supplied

Tuff Terrain’s insect screen sits behind the grille on Ford Ranger PX2 models from 2016 to 08/2018 and blocks bugs before they clog the radiator fins. The mesh panel also takes the hit from loose stones, meaning your grille and radiator face cop less damage on long runs. The removable screen mounts with simple hardware, so you pop it off, hose it out and get out there again fast.

A 1 mm steel mesh sheet does the heavy lifting and holds shape against wind pressure and flying grit. The zinc-plated base coat fights rust when you are running from the bush to the beach or sitting in coastal air. The powder coat top layer seals the surface, helping the screen go the distance trip after trip. All fittings come in the kit, making it a smart buy for anyone loading up a touring Ranger. Terms and conditions apply.

Q: How often should I remove and clean the Tuff Terrain insect screen?

A: Clean the screen whenever you notice visible bug build-up or airflow restriction. Regular cleaning helps the radiator breathe properly, especially after long highway runs at night when insects are thick. Many drivers check it at each fuel stop on big trips. Cleaning is as simple as removing the fasteners and hosing the mesh from the rear side.

Q: Can I use a pressure washer on the mesh when cleaning it?

A: Yes, a pressure washer is generally fine if used with care and at moderate distance. Direct the spray from the engine side outwards to push debris away from the radiator face. Avoid placing the nozzle very close to the mesh to prevent bending. Always let the screen dry fully before re‑installing.

Q: Will the screen affect engine temperatures during towing or in hot weather?

A: The screen uses a specially designed mesh that allows adequate airflow to the radiator. Under normal operating conditions the Ranger cooling system still receives strong airflow. Very heavy towing in extreme heat may justify more frequent inspections to confirm the mesh is clear. Keeping the screen clean helps maintain stable coolant temperatures.

Q: Can this insect screen stay installed during off-road use?

A: Yes, the 1 mm steel mesh and solid mounting hardware suit on-road and light off-road use. The screen helps deflect small stones and seeds kicked up by other vehicles. Avoid impacts with large branches or obstacles that could deform the grille area. Inspect the mesh after any contact and re‑secure or straighten if required.

Q: Is any painting or extra rust protection needed before fitting?

A: No extra coating is required as the mesh arrives zinc plated and powder coated. The dual-layer finish offers strong resistance to rust in typical Australian conditions. You can periodically rinse off salt or mud to maximise service life. Touch-up paint is only necessary if deep scratches expose bare steel. Terms and conditions apply.