Name: Tuff Terrain Bonnet Mount Antenna Bracket to suit Mitsubishi MV Triton 2024+
Brand: Tuff Terrain
SKU: BAB-012
Price: 70.0 AUD
Availability: InStock

Tuff Terrain Bonnet Mount Antenna Bracket to suit Mitsubishi MV Triton 2024+

$70.00

Aussie Designed

Low stock - 1 item left
Backordered, shipping soon

SHOP NOW VIA

• 1 x Tuff Terrain bonnet mount antenna bracket to suit Mitsubishi MV Triton 2024+ (passenger side)

• Vehicle specific bracket for MV Triton

• 316 stainless handles Aussie coastal use

• Black powder coat shrugs off grime

• Passenger side mount keeps whip clear

• Uses existing bonnet mounting points

• Smart buy for clean antenna setup

Tuff Terrain bonnet bracket mounts a UHF or comms antenna on the passenger side of a Mitsubishi MV Triton 2024 onwards, which keeps the whip forward and clear of roof racks and canopies. Vehicle specific bolt pattern lines up with the MV bonnet hardware to give a factory style fit without odd shims or drilling. Low bracket height tracks the bonnet edge to keep the gear tucked in while you get out there from the bush to the beach.

316 stainless steel plate handles coastal air and wet red dirt as it resists rust and pitting trip after trip. Black powder coat outer layer deals with stone flick and road grime, which keeps the bracket looking tidy on daily runs. Pre bent sections spread the antenna load across several mounting points to help the bonnet skin go the distance. Flat pad suits common UHF stud bases, meaning you can match the antenna to your current setup.

Q: Can the bracket stay in place when using automated car washes?

A: Yes, the fixed mounting points hold the bracket during normal automated car wash cycles. The 316 stainless plate resists water exposure and detergents. The black powder coat surface sheds rinse water rather than soaking it. Any attached antenna should still be checked against the antenna manufacturer’s wash guidelines.

Q: Does this bracket affect bonnet alignment or panel gaps?

A: No, the vehicle specific bends follow the Mitsubishi MV Triton bonnet contour. The mounting holes match existing bonnet hardware, which keeps the panel seated in its original position. Correct torque on the bolts maintains factory gap lines. Any visible misalignment usually points to incorrect installation rather than the bracket shape.

Q: Can I mount a light or other accessory on this bracket instead of an antenna?

A: The bracket is specified for UHF or communication antenna bases only. The flat pad suits stud style antenna hardware, which focuses loads through a central fixing. Light brackets or heavier gear can introduce leverage the design does not cater for. Keeping use to antennas helps protect the bonnet skin and bracket over time.

Q: Will the bracket interfere with bonnet insulation or under-bonnet accessories?

A: The design follows the bonnet edge and existing hardware points, which places the metal outside the normal insulation pad area. Most factory insulation sheets sit higher up the inner skin. Any aftermarket accessories mounted near the hinges should be checked for clearance. A slow test close of the bonnet confirms there is no contact.

Q: Is any drilling or cutting required during installation?

A: No, the bracket uses existing bonnet mounting points on the MV Triton. The slotted and round holes line up with factory fasteners. Reusing those bolts keeps the paint system intact around the hinge area. Adding extra holes in the panel is not part of the specified fitment method.