Name: Tuff Terrain - 30cm LED Strip lights Orange/White - Dimmable
Brand: Tuff Terrain
SKU: TTLEDSTRIP-30
Price: 59.0 AUD
Availability: InStock

Tuff Terrain - 30cm LED Strip lights Orange/White - Dimmable

$59.00

Aussie Designed

Available to order
Backordered, shipping soon

SHOP NOW VIA

• 1 x Dual Colour Dimmable 30cm LED Strip Light

• 2 x Self-drilling screws

• 2 x M6 nut and bolt kit

• 1 x power cable with open end

• Dual amber and white light modes

• Dimmable brightness for camp or work

• Runs on standard 12V vehicle power

• Slim bar fits under doors and shelves

• Epoxy sealing helps resist dust and moisture

• Mount with screws, bolts, or 3M tape

Tuff Terrain’s 30cm dual-colour LED strip slots straight into canopy builds and camp setups, as the slim bar throws light exactly where you need it. The 12V DC input matches your vehicle system, meaning you wire it straight into your existing setup. Amber mode keeps the campsite mellow, while white mode lights up drawers, tailgates or cooking benches.

An epoxy-sealed body keeps dust and moisture off the LEDs, which helps the strip go the distance on rough trips. The built-in dimmer manages brightness and power draw, a smart buy when you are running off batteries. Supplied screws, M6 bolts and 3M adhesive give you options from the bush to the beach. Grab a few different lengths across your rig to keep every work area covered.

Q: Can I wire this LED strip directly to my 12V auxiliary battery?

A: Yes, the strip runs on 12V DC and can connect to a suitable fused 12V circuit. Many users run it from an auxiliary battery in the canopy or rear cabin. A fuse close to the power source protects the wiring in case of a short. A switch or controller between the battery and light helps you manage power use at camp.

Q: Is the amber mode better around insects at night?

A: Amber light generally attracts fewer insects than bright white light. Many campers use amber mode near cooking or seating areas to keep bugs away from food and faces. The dual-colour setup lets you swap back to white when you need more detail for packing or tool work. This flexibility makes one strip useful in different camp zones.

Q: Do I need to drill holes to mount the strip?

A: No, drilling is not always required because 3M adhesive backing is supplied. You can stick the strip to a clean, dry surface for no-drill mounting. If the area sees heavy vibration or heat, you can back this up with the included self-drilling screws or M6 bolts. This mix of options suits both temporary and permanent installs.

Q: Can I use multiple strips on the same circuit in my canopy?

A: Yes, multiple strips can run from one 12V circuit if the wiring and fuse match the total current draw. Many canopy builds use two or three strips across drawers, tailgates and annex areas. A central switch panel or controller then controls each zone. An auto electrician can confirm wire size and fuse selection for larger setups.