Name: Tuff Terrain Water Filler Kit (Straight)
Brand: Tuff Terrain
SKU: TTWFK2
Price: 39.99 AUD
Availability: InStock

Tuff Terrain Water Filler Kit (Straight)

$39.99

Aussie Designed

Available to order
Backordered, shipping soon

SHOP NOW VIA

• 1 x Straight silicone pipe (approx. 30 cm length)

• 2 x Hose clamps

• 1 x Filler neck

• 1 x Filler cap

• Complete filler kit for Tuff Terrain tanks

• UV-resistant silicone hose made to last

• Straight run helps prevent hose kinks

• 38 mm inner diameter supports good flow

• Compact 30 cm length for tight spaces

• Hose clamps included for secure joints

Tuff Terrain’s Water Filler Kit (Straight) hooks your TT45WT, TT40FWT or TT42WT tank up to an external filler neck so you get a clean, direct run for topping up water. The straight silicone hose keeps the path simple, which means fewer chances for kinks or blockages when you are out from the bush to the beach. The body-mounted filler neck gives you a consistent spot to use every time you pull up.

The UV-resistant silicone hose handles hot Aussie sun day after day, which helps it go the distance across touring seasons. The 38 mm inner diameter mates to the tank inlet for steady flow while the 30 cm length suits tight builds where space matters. The hose clamps bite down on each end to keep connections snug, making this kit a smart buy for tidy water setups. Terms and conditions apply.

Q: Does this filler kit work with other brands of water tanks?

A: The kit suits Tuff Terrain TT45WT, TT40FWT and TT42WT tanks. Other tanks may not share the same inlet size or style, which can affect sealing and fit. If your tank is not one of these part numbers, check the inlet diameter and filler requirements before purchase. Mixing brands without checking specs can lead to leaks or poor flow.

Q: Can I cut the 30 cm hose shorter if my tank is very close to the filler point?

A: Yes, the silicone hose can usually be trimmed. A clean, square cut with a suitable blade maintains a good sealing surface at the clamp area. Always measure twice before cutting to keep enough hose for proper alignment. After trimming, test fit the hose and clamps before final tightening.

Q: Is any sealant needed around the filler neck when mounting it through a panel?

A: Sealant may be required, depending on the panel material and shape. A non-hardening sealant around the neck flange can help stop dust and water tracking through the cut-out. The exact sealant type depends on your body material, such as aluminium or steel. Always follow the sealant manufacturer’s directions.

Q: Can this kit be used on both caravans and canopy setups?

A: Yes, as long as a compatible Tuff Terrain tank is installed. The filler neck can mount through a caravan wall, ute canopy or toolbox panel. The key requirement is access to the tank inlet and enough flat surface for the neck flange. The straight hose suits close tank-to-wall layouts commonly found in these builds.