Name: Tuff Terrain Bonnet Mount Antenna Bracket to suit Toyota Prado 120 Series & Lexus GX 470
Brand: Tuff Terrain
SKU: BAB-003
Price: 70.0 AUD
Availability: InStock

Tuff Terrain Bonnet Mount Antenna Bracket to suit Toyota Prado 120 Series & Lexus GX 470

$70.00

Aussie Designed

Available to order
Backordered, shipping soon

SHOP NOW VIA

• 1 x Tuff Terrain bonnet mount antenna bracket

• Vehicle specific fit for Prado 120

• Also suits Lexus GX 470 bonnets

• 316 stainless steel fights corrosion

• Black powder coat adds surface protection

• Passenger side mount keeps view clear

• Suits common UHF antenna bases

Tuff Terrain bonnet antenna bracket shifts your UHF whip to the passenger side bonnet edge on a Prado 120 or GX 470, which keeps the mast away from your main sightline while you tackle busy traffic or dusty tracks. Vehicle specific shape lines up with the bonnet mounts to sit flat, meaning the gear feels factory neat and stays put when you get out there from the bush to the beach.

316 stainless steel plate stands up to wet coastal roads and muddy outback ruts as the alloy shrugs off rust that chews mild steel. Black powder coat finish helps the bracket blend with modern trim while it cops gravel and sun day after day. Pre cut antenna and bolt holes line up with common UHF bases, making this bracket a smart buy for tidy 4WD comms setups.

Q: Can I mount the bracket on the driver side instead?

A: No, this bracket suits the passenger side bonnet mounts only. The hole spacing and bends match that side on Prado 120 and GX 470 models. A driver side fit would misalign the hardware. Use only on the specified side to keep the bracket seated correctly and to avoid stressing the bonnet panel.

Q: Will this bracket interfere with bonnet opening and closing?

A: The bracket uses existing bonnet mounting points outside the hinge path. That layout keeps the hinge motion clear. When installed correctly the bonnet opens and closes in its normal arc. Always check clearance around aerial cables before final tightening.

Q: Do I need to repaint any cut metal after installation?

A: No drilling into the bonnet is required, so factory paint stays intact. The bracket itself carries a black powder coat layer. Any minor marks on nearby paint from tool slips should be touched up with suitable automotive paint to prevent corrosion.

Q: Can I fit a heavy spring-base antenna to this bracket?

A: The bracket supports common UHF whip and spring bases used on touring 4WDs. Very large or extra tall masts may apply higher leverage. Always check the antenna manufacturer’s recommendations and inspect the bonnet frame area for movement after your first few drives on rough roads.