Name: Tuff Terrain Bonnet Mount Antenna Bracket to suit Isuzu DMAX/MUX & Mazda BT50 2021+
Brand: Tuff Terrain
SKU: BAB-013
Price: 70.0 AUD
Availability: OutOfStock

Tuff Terrain Bonnet Mount Antenna Bracket to suit Isuzu DMAX/MUX & Mazda BT50 2021+

$70.00

Aussie Designed

Available to order
Backordered, shipping soon

SHOP NOW VIA

• 1 x Tuff Terrain bonnet mount antenna bracket (passenger side)

• Vehicle specific bracket keeps fitment tidy

• 316 stainless steel handles coastal use

• Black powder coat shrugs off road grime

• Passenger side mount suits touring setups

• Flat pad suits common UHF bases

Tuff Terrain bonnet mount antenna bracket holds your UHF or comms antenna out on the passenger guard where it can work cleanly. Vehicle specific bends line up with factory holes so the gear sits straight without odd angles. Passenger side spot keeps the whip clear of racks and snorkels on most touring setups. Solid one piece body keeps the antenna base stable on corrugations so your signal stays consistent from town to track.

Grade 316 stainless steel handles salty beach air and humid coastal runs without the bracket chewing out. Black powder coat adds another layer between the metal and flying grit which helps the kit go the distance. Pre cut holes use existing bonnet mount points so you keep the panel tidy. Flat mounting face lets you bolt on common UHF bases so you can get out there with comms sorted.

Q: Can I paint the bracket a different colour?

A: Yes, the bracket surface accepts repainting if correctly prepared. The existing black powder coat acts as a stable base. Light sanding creates a key for new paint. Compatible primers and top coats should follow paint manufacturer advice. Any extra thickness around bolt holes should be kept minimal.

Q: Does the bracket affect bonnet alignment or panel gaps?

A: No, the vehicle specific profile follows the original bonnet mount stack height. The bracket seats between existing hardware faces. Correct torque on the bolts maintains the factory clamp load. Any change in gaps usually indicates dirt or mis-positioned washers rather than the bracket.

Q: Can the mount support dual antennas with a custom plate?

A: The flat pad supports one antenna base as supplied. A custom plate may increase leverage on the mounting area. Any modification should account for antenna mass and wind load. Fabricator advice is recommended before adding extra hardware.

Q: Will the bracket contact aftermarket snorkels or racks?

A: The passenger side location clears many common touring setups but final clearance depends on each accessory. Test fitment without fully tightening bolts first. Check movement through the full bonnet open and close range. Any interference should be addressed before road use.

Q: Is the bracket CE or RoHS certified?

A: The supplied data does not state CE or RoHS certification. The bracket functions as a mechanical mount without electrical components. Compliance needs usually apply to the antenna and radio system. Installers should confirm requirements for their region if exporting the vehicle.