Name: Tuff Terrain Bonnet Mount Antenna Bracket to suit Toyota Landcruiser 200 Series 2016+
Brand: Tuff Terrain
SKU: BAB-005
Price: 70.0 AUD
Availability: InStock

Tuff Terrain Bonnet Mount Antenna Bracket to suit Toyota Landcruiser 200 Series 2016+

$70.00

Aussie Designed

Available to order
Backordered, shipping soon

SHOP NOW VIA

• 1 x Tuff Terrain bonnet mount antenna bracket

• Vehicle specific Landcruiser 200 fitment

• 316 stainless resists coastal corrosion

• Black powder coat keeps factory style look

• Passenger side mount clears driver view

• Bracket supports UHF or comms antennas

• Mount uses existing bonnet locations

Tuff Terrain bonnet mount antenna bracket lets your Landcruiser 200 Series 2016+ carry a UHF or comms antenna off the passenger side edge of the bonnet. Vehicle specific bends pick up the factory hinge bolts, meaning the gear lines up clean without stressing the panel work. Flat top plate suits common UHF bases which keeps your setup simple when you swap or upgrade antennas. Passenger side position keeps the mast out of your main view so you can focus on ruts and washouts.

316 stainless steel construction stands up to coastal spray and wet season grime as the alloy resists surface rust. Black powder coat finish tones in with most OE trims while it also adds a barrier against stone flick and dirt. Formed profile spreads load across the hinge area which helps the bonnet skin stay straight over rough roads. It is smart buy gear for long touring setups from the bush to the beach.

Q: Can this bracket carry tall or heavy UHF antennas?

A: Yes, within normal UHF antenna sizes. The 316 stainless construction and folded profile manage typical touring aerial loads. Extremely tall or heavy antennas increase leverage on the hinge area. In those cases it pays to check antenna maker recommendations and inspect the bracket and bolts regularly on long trips.

Q: Will the black powder coat match my Landcruiser paint colour?

A: No, the finish is a neutral black, not vehicle paint code matched. The coating aims to blend with general trim rather than body colour. Many owners pair it with black snorkels or bar work. If you need a colour match you can over‑paint the bracket after suitable prep.

Q: Can I move the bracket to the driver side instead?

A: No, the shape and hole pattern are specific to the passenger side hinge. Swapping sides affects alignment and clearance. Using it on the driver side could foul panels or wipers. For driver side mounting you would need a bracket made for that location.

Q: Does the bracket include a gasket or isolator?

A: No separate gasket is listed in the supplied data. The bracket generally mounts directly under existing bonnet bolts. If galvanic isolation or extra paint protection is important you can add thin gasket material or film tape. Just avoid adding thickness that upsets bonnet alignment.